Home > Aircraft Accessories (click to expand) >

Mini-Oops Rivets: sold by the ounce
Mini-Oops Rivets: sold by the ounce


 
Rivets occasionally don't set properly and must be replaced. The key to doing a good repair is to not cause more damage by enlarging the rivet hole when drilling out and replacing the bad rivet.

The typical "Oops rivet" sold by Van's and others is a full rivet size larger in diameter than the rivet being repaired. That is to say that a -3 rivet with a 3/32" shank might be repaired with a 1/8" shank Oops rivet. This technique needlessly enlarges the rivet hole, in this case by 33%.

There is a better option. Our "Mini-Oops" flush rivets are only 1/2 rivet size larger. In other words, our -3 "Mini-Oops" rivet which replaces a standard -3 rivet with a 3/32" shank has a 7/64" shank. This increases the rivet hole by only 16% compared to 33% for a regular Oops rivet. This means that the rivet hole stays much closer to the originally specified size.

Use the chart below to reference for size.

Mini-Oops Size_________ Repairs this Rivet | Price Per Oz. Mini-Oops shank diam. Original Rivet Diam. Approx. qty. per oz.
NAS1241AD3-3 AN426AD3-3 $15 7/64" 3/32" 300
NAS1241AD3-4 AN426AD3-4 $15 7/64" 3/32" 235
NAS1241AD4-4 AN426AD4-4 $12.50 9/64" 1/8" 145
NAS1241AD4-5 AN426AD4-5 $12.50 9/64" 1/8" 120


Item# Item Name Our Price Qty Add
3501-0001 NAS1241AD3-3
$15.00
3501-0002 NAS1241AD3-4
$15.00
3501-0003 NAS1241AD4-4
$12.50
3501-0004 NAS1241AD4-5
$12.50
Check the items you wish to purchase, then click