The Double LED spotlight comes from our "The Works" kit and is now available individually.
- Only 2 amps current draw per spotlight versus 5+ amps for a halogen!
- 2400+ lumens of nice clear 8 degree beam of white light.
- With a linear power supply design, there will be no radio or intercom noise. None. We promise!
Supplied un-assembled as the completed light PCB, heatsinks, collimating lens, and mounting nutplates and rivets. Each light requires about 15 minutes of assembly time. (No soldering required!)
We sell as an optional extra mounting screws and springs so that they can be adjusted for aiming, or they can simply be screwed into place inside your existing (or DIY!) lighting brackets
The board size is 95x50 mm. These would be fantastic for the leading edges in a smaller light bay, or perhaps mounted in the cowling behind some plexiglass for full light coverage.
Add a diffuser disk to break the beam of one light into a 20-degree flood.
The heatsinks extend 70mm behind the board, and the collimating lenses are 27mm tall. They are not specifically waterproof (or very aerodynamic!) so they would need to be mounted behind plexiglass in your DIY creations.